What August already

Time is flying again! Ive been doing some more work on the 3D printed signals i'm nearly ready to go into full production. I'm still working on ways to make the moving parts work better. I think i will release non moving ones first, that way people can start to enjoy my signal. I think there will be only a few that will want to try and have moving signals. For now getting the moving parts installed in the final position is still a bit fiddly which im trying to improve on. I've got a few idea just have to see if they will print out ok.

My last print from Shapeways was a bad one. Something happen when i uploaded the file and the items did not print ok. I was also doing a test on the windows and when they came back to me the windows were all filled in. The signal mast had a bend and a twist as well.

Etching, I'm hoping to get back into this sometime this week or next. I'm using some different brass sheets from before that will arrival this week. I think i know what was going wrong in the last lot of testing. Once i get this right i will go into track laying mode. YAY Its been a long wait, but it will be worth it in the end.

Below are some shots take from a friends layouts which is still under construction. The standard of work is very high. Something i hopping to do. The scenery is just brilliant but the work under the bench is just as good. Its a very high tech layout with local panels and also computer interfacing as well and very neat wiring to go with it all.
 Please enjoy. Click the pics to make bigger

July Update

Hi all, life is keeping me busy, but i've had some time to do some modelling. I've had a second run of 3D items which worked out ok. They printed many items on a different axis which resulted in a poor print. This was ok as I had forgot to add many items back onto the signal post while editing the things I need to fix. I now have a 3rd run in the post and hopefully I've got it all right so I can write up instructions and than do a production run.  In the mean time I have been working on other 3d printed objects and also learning more parts to Cubify software program. Recently I've started work on the spray etching tank. I'm hoping this will give me a good enough result to start etching my sleeper plates and than finally start building track, which is very over due. I'm hoping to finish the tank within the next two weeks and ill post some pictures than.

Well I think that's it for now, hopefully I will have good news about my 3d printed signals this week and I look forward to making them available to everyone. Below is a lovely picture of  R 761 in the sunlight. The photo was taken from Steamrail website, which is well worth a visit.

My first 3D print

Well i have got my first 3d print from Shapeways and i'm fairly happy with how it went. There are a few things i need to change i'm always pushing the design rules. A few holes need to be bigger and a couple of items need to be made bigger so they can print.  This is just a quick post just to get some of the photos up. I will do a full review soon. I rushed the paint job, had a few bad brushes and a used a new undercoat. I did't like it so i will go back to my old one. This one was to thick. I wanted to get it reday for a meeting and had very little time this week. As it was only a test piece im not to fussed about it. The signal finial printed in two pieces so i had to glue it back on. Design fault. opppys! Signal lamp has a Nano led in it. Look great when turned on. The rail chair for the turnout im really happy with as well. Anyway here are the pics, more info to come soon. Enjoy

Note The camera picks up the printing layers, but to the eye it had to see them in real life.
Click the pictures to make them bigger
Sorry about the photo placement. I'm still having trouble with the way it is letting place the photos

3D Printing Preview

Well as promised here are some screen shots of the 3D printed items i've been working on. The drawings are all at different stages of production.  I use a software program called Cubify Design. Its is fairly easy to use, but it is like learning a new language and there have been some frustrating drawing sessions. Progress is going well and I'm hoping to send off the first test print very soon. Most of the items are very slightly over scale. This really frustrated me, but to make it all work it had to been done. When look back at now its ok, as it all blends in well because they are all slightly over scale so it can't be noticed unless you get the ruler out.  Enjoy

Click on the picture to make bigger

2 Position Semaphore signal
In the stop position

In the proceed position

Showing the whole signal

(note concrete base missing)

There is still more work to been done on the post. The weighted arm and its bracket are still been drawn and also the cable wire wheel also needs to be done. I would like point out there are a few parts that will get printed separately to allow for them to move.

Joint bars

These parts are going to be used to join the rails together.  I was going to etch these at first but i can get far better detail with 3D printing.  I'm not sure if i will do multiple prints of these or do a fret and than cast them. Still thing about this.

Rail brace

This part is used on the turnout to brace the rail on the outside where the point blades are. It will add a nice touch to my turnouts, hopefully.

WSA turnout lever

In the reverse position

 The frame work is not finished yet but I'm hoping these work like a treat. When the yard turnout moves, the lever moves as well, very cool i think. If you haven't noticed i like things to move on my layout. I feel it adds so much to it.

Well i hope you have enjoyed looking at what I've been working on. Hopefully in the next post i will have these parts in my hands!
Any question on 3D printing feel free to email me at bendigonscale@live.com.au
cheers

 

Building the modeling desk Part 2

Well the modelling desk is pretty close to finish now. Just a few minor details need to be done.  The selves went in really nicely and all works well. I just need to add some lights and its all good to go.  I’m really happy with it as has given me heaps of room to do all my modelling.

I recently did another test etch with a different etching solution that i had been reading up on. I’m not happy with the results. It proved to be a very uneven etch and took way to long (20mins). Not all is lost as i got my alignment perfect this time which i was happy about.  With that all happing i wasn’t really sure what to do next, but luckily for me i had a chance to talk to Phil Badger from Badger Bits and he gave me a lesson on how to do. Phil is the guy to talk to about this as he used to teach etching in tafe and has done many etching himself.   He made some great points and i learnt a lot in the 30min chat we had.  So it’s back to the drawing board for a new etching talk which means track work is on the back foot again but hopefully for not long. For some reason I’m really keen to have sleeper plates on my track so i have to get this right before anything else can move along. Very frustrating, but I’m sure the results will pay off with some very nice and once off looking track.

In other news I’ve been working on several different 3D printing parts as well, which are looking very nice. I will post some pics of them later on this month.  I thought of getting the sleeper plates 3d printed, but i need them to be brass as it will conduct the power to the rails.   

Building the modeling desk Part 1

With our recent house move i needed to make a new modelling desk. I normally have a few projects on the go at once so i need some good working space. When i was making up the design,  i decided to have 3 main sections on the desk. Machining,  Assembly and a drying/holding section. The room the trains are in now has a nice window/ door way area. I wanted to be near a window for the views, but mainly so i can have the window open when working with glue and soldering.  Down below are the materials i used and an outline on how i built it.

Materials used.

4x 1800x 600x 18mm laminated pine sheet (desk & boxes)

3x 1200x 140x 19mm pine plank (upper shelves)

2x 1800x 140x 19mm pine plank (upper shelves)

1x 1200x 184x 19mm pine plank (upper shelves)

1x 1800x 184x 19mm pine plank (upper shelves)

3x 1200x 600x 3mm Mdf sheets ( backing on shelves & boxes)

5x 550mm shelve running kit

100x 25mm timber screws

I first made up the two boxes. These boxes are at each end of the desk. They are 720mm high by 600mm wide and 550 in depth. First i needed  to trim down the laminated pine sheets. I trimmed off 40mm on the sheets. This was down to make a 40mm lip on the desk. I used a power saw and a metal guide bar to get a nice straight line when cutting the wood.  Next was to install the draw runners.  These are very easy to install. I set the centre height i wanted for each draw and than drew a line across the two sides of the draw.  I than screwed in the runners with the supplied screws, using the line as a guide. The boxes were than screwed together using the normal method of using a pilot hole, and counter sinking the screws. A 600x 600mm Mdf sheet was nailed onto the back of the boxes to act as a backing.

Cutting guide

Centre line for shelf runner

Installed runners

Finished boxes

Close up of box

Next was to cut the desk out, this was fairly easy to do. Because i have an angle turn in the desk  i had to get angle right before i made the cut.  One length is 1800mm long and the other side is 1000mm long, both 600mm wide.  Once this was done the desk was screwed down from under the desk through the boxes. I also screwed in a piece of wood to support the join on the desk.

I than made up the upper shelves to go on the 1000m length desk. This was made nearly same way as boxes. I used 140mm wide shelve with a height of 600mm. I used a 184mm wide plank to go top. I plan to add some led lights along the overhang. Work has started on the second shelf and will explain more in part 2.

Half finshed desk

Half finshed desk

2013 in review, what's planned for 2014

Well It’s come to the end of another year so I thought I’ll give a review of the year of what’s happen and what’s planed for 2014.

2013 has been very busy outside of Bendigo, a house move, working lots of days and the birth of our daughter, time sure has disappeared. With all that happing not much was done on Bendigo. I was hoping to have most of the rail laid by now. However many parts have been design for etching which took a lot time. I had to spend a lot of time making up parts for the future to fill up the minimum A4 sheet needed for the etching house. Once that was done I them made the decision to do the etching myself. I’ve also have decided that some of the etch parts I will now get 3D printed, which will be better with detail and strength. So it was a wasted few months, but many things were learnt so there is still a positive to it.

Doing my own etching has been a great learning process. The first run didn’t quite work out, but I was still very happy with the result.  I’m now looking at a new etching solution that does not need to be heated. I’m in the process of getting these acids.  Having a non heated solution will be a lot easier to use and I will be able to build a simple etching tank.

What’s for 2014

The first thing for 2014 will be the construction of my new modelling desk.  This will be a purpose built desk that will give me plenty of room to work on all my projects. I normally have a few projects on the go at once, usually a loco, rolling stock, a building and track work. So having set areas of space is important.  The desk is 1800mm long by 600mm wide and also 600mm high.  The angle bit is 1000mm long and has the same height and width.  I have also made a top self to run a bit of track for programming loco and speed testing.  The middle tower will hold power packs, soldering iron and a Pr3 interface. The two boxes below will hold draws, the one on the left will hold a mitre size and other tools. The one on the right will be for storage of models that are drying. The desk will have three many sections from left to right, Machining, Assembly, and Holding. I look forward to getting this done as I will be able to unpack all my train stuff and I won’t need to use the old small round table.

Click to make bigger

 

Once the desk is done I planned to get right into rail laying. I hopefully my etching skills will be ready and my 3d parts as well. I plan to start with the straight track and then moving onto the turnouts. I will also be starting work on the brick/stone road bridge as this needs to be done so i can get the landscape heights right.

2013 had many learning curves, slow progress on the layout but I’m hoping in 2014 will show the fruits of 2013. I would like to wish everyone a Merry Christmas and a happy new year.