Tuesday, 29 January 2013

Sleepers done

Track gangers have left the site (well for a short break)
Well just coming under 4000 sleepers i have finished laying most of the sleepers on the module. Only ones needed to do are the sleepers near the end plates and also near where i have to drill the holes for the throw bar wire to come through. Once the holes are drilled i will than place those sleepers in.  Some of the gaps you will see are also for the PC sleepers.  From all the plans ive been able to use i have laid the sleepers to about 98% as they were in real life. In some areas there may be one or two sleepers that might not be right but this is due to having a scale of 1:160. Im very happy the way it has gone so far. Down below are the photos of the module.  I love the look of the wooden sleepers, the placement and the spacing of them. (Not all in a perfect line, its my pet hate with commercial track it to straight and perfect) Once coloured and scenery is done they will blend in very nicely and look very prototypical. 
Click on photo to make them bigger

Whats next?
Well im a bit track laying out for now, so im going to work on landscaping the area. This will involve getting the right heights of the hills and ditches. Ive been lucky enough to find a plan with contours on it which will help me greatly in getting the land form correct. I will also be working on some more brass etches so i can send off a final test run and i will also start the design work for the brick covert drain and the brick and stone road over bridge.  I plan to make my own brick paper and stone moulds for this.  Once again any one has plans or photos to share that my help email me at bendigonscale@live.com.au

No comments:

Post a Comment